Commercial Artificial Turf

One of the selling points of our turf is that it is clean and chemical free. There is nothing that can rub off on fabric or create stains like natural grass.

Our products can stand up to drastic fluctuations in temperature and weather conditions. There are very few conditions that could cause any significant damage or concern.

No. Artificial turf is not the right environment for rodents or other garden pests, so they tend to gravitate to yards with natural grass to dig and burrow.

There are huge differences in the quality of artificial grass. A simple example: Most artificial grass types have single backing (which is the fabric on the bottom side) while Next 2 Natural products have double backing. This makes it firmer, easier to install, adds more back support to the grass and protects against shrinking and expanding. Our thread, the grass itself, contains no heavy metals. Many other types of artificial grass have color pigments that contain tiny concentrations of heavy metals. For plastic toys there are very strict regulations in place, but for artificial grass this does not apply. That’s why we demand ourselves to use fibers that are guaranteed to be clean and safe. Does the quality of the material have an influence on the way artificial grass is produced? No. Not directly. The process is pretty much uniform, regardless of quality. That’s why we can summarize the production of artificial grass easily into five steps.

Step 1 – Tufting

Initially, there are two resources: fiber and backing. The fibers come on big spools, and the backing comes on rolls of over 4 meters wide. The first step is to bring those two together. This happens in the so-called ‘tuft’. The fibers are transported through tubes that are hanging on top of the machine into needles. Those needles stitch the fibers from above into the backing. A hook then pulls the thread back, creating a loop. This process is called tufting. And indeed, that comes pretty close to sewing with a sewing machine. The difference is that the thread disappears in the fabric and the grass needs to stand up straight in the backing.

Step 2 – Coating

The fibers are now still loose in their backing. When you grab a fiber on the bottom side of the backing, you will pull it out without any effort. That is why the bottom side will get a protective layer. This is a coating of glue, which makes sure that the fibers will stick to the backing. There are two ways in which the coating can be applied. With most machines, the artificial grass enters the machine with the backing face up. The coating is then pulled over the backing. We, however, choose to insert the artificial grass with the backing face down. The coating is then ‘licked’ to the bottom side. This process results in a more equal and smooth result.

Step 3 – Drying

Another part of the process that shows the difference between superior and inferior quality artificial grass is the drying process of the coating. Usually, artificial grass goes straight into the oven to dry. Not with us. First, we put the grass into an infrared booth. In this booth the grass is given a ‘wallop’. We give the grass a good scare, so to say. This way the coating will already lose much of its moisture. The advantage is that the oven can do its work on lower temperatures.

Is that important?
Yes. The more time you give anything to dry, the better, more beautiful and stronger the result. This applies to everything including artificial grass. And we understand that the higher the temperature in an oven, the more quickly the coating will dry, the faster you can have grass run around the spool and the more meters you can produce per hour. Financially, the hot and fast way is more profitable. But from the point of view of quality, we are willing to be cool and slow.

Step 4 – Perforating

Artificial grass needs to be perforated. If this is not done, rainwater cannot escape, and pools will form on your lawn. It is a small step, but essential in the process. There is really no difference in this in any artificial grass product. That being said, it is definitely an advantage that our backing consists of a double layer. This makes it more solid than most other backings. With every hole you make in the material, you lessen its integrity. But: the thicker the material, the less impact this has.

Step 5 – Rolling

This might be the most underappreciated and probably the trickiest part of producing artificial grass: rolling it up, or dragging, as they say here in our factory. The grass is 4 meters wide when it is dragged onto cardboard spools. The big challenge here is to make sure the tension that comes onto the grass is exactly — and we mean exactly — the same across the entire width of the spool. Because what happens if the tension isn’t the same everywhere? The grass will ripple in places where there is less tension. It is given room to maneuver and expand. This leads to unusable pieces. And that is something we definitely do not want. We strive for uniform quality, across the entire width of the spool. The artificial grass is finished. It is wrapped in plastic wrap to protect it against external influences and is then stored in the warehouse. Usually, it is then transported over the entire globe.

We follow industry-leading installation techniques to ensure that your new turf lawn is properly leveled with proper irrigation and drainage. With a Next 2 Natural turf install you can expect: Seamless finish, Quality edging and Accurate leveling

We always install expertly leveled lawns with no visible seams. This is one area where many of our competitors fall short of customer expectations and one that we take very seriously. Between our expert fitting team, the quality of our construction materials and the specialized, up-to-date equipment we use to complete the job, we are sure you will be thrilled with the seamless look of your new artificial turf.